Northern Connectors Radiall High Voltage Coaxial Connectors - Manual

www.radiall.com
15-13
H
ig
H
vol
tage/
BNC H
t
INTrOdUCTION
This catalogue features 4 series of high voltage coaxial connectors, able to withstanding continuous voltages
up to 20 000 V.
teSt voltageS
The test voltages quoted in this catalogue are indicative only. They correspond to those made under normal atmospheric
conditions during a test period of 1 minute as specified in the French standard NF EN 60068 - 1.
oPeRatiNg voltageS
The operating voltage is chosen under the responsibility of users, depending on the conditions in which the connectors
will be used (environmental, safety factor…). The indicated cables are recommended for the mechanical and dimensional
suitability with our connectors. As to the electrical characteristics of the cables and in particularly the maximum voltage
capacity, it is necessary to conform with the recommendation of the cable manufacturer.
The connectors of this series are not intermateable with those of the BNC and SHV series.
ELECTrICAL CHArACTErISTICS
Frequency range DC - 2 GHz
Impedance 50Ω
VSWR (plug and jack) 1.20 + 0.2 F (GHz)
Test voltage
unmated
connectors
(male)
(female)
6 000 V D.C.
8 000 V D.C.
mated pair 10 000 V D.C.
Current rating 10 A
MECHANICAL ANd ENvIrONMENTAL CHArACTErISTICS
Mating cycles 500
Vibration 20 g - 2 000 Hz
Shock 50 g
Salt spray 48 H
Temperature range
- 55°C + 155°C
- 40°C + 70°C (with polyethylene insulator)
MATErIALS ANd PLATING
Components Materials Platings
Body Brass Nickel
Center contact Brass / Beryllium copper Silver
Other metal parts Brass or Beryllium copper Nickel
Insulator PTFE / Polyethylene
Gasket Silicone rubber
All dimensions are given in mm
CHArACTErISTICS BNC HT