NTi Audio TalkBox User Manual

Page 12

Advertising
background image

12

13

Line In

XLR input connector for external audio signals.

The Line In mode (Select Track switch = “0”) enables to play an external audio sig-
nal with the NTi Audio TalkBox. In the Line In mode the Play LED indicates an input
signal > -30 dBu and the Clip LED is activated at input signals > +15 dBu.

The DSP based equalization introduces a signal propagation delay of 59 ms be-
tween the Line-In and the acoustical output. Consequently and in order to guaran-
tee synchronicity between the acoustical output and the line-output for delay time
measurements the latter is also delayed by 59 ms.

Line Out

Using the balanced line out, the TalkBox operates as a signal generator. The stored
signal of the CF-Card or any connected signal from the Line In connector is directly
send to the Line Out connector (not equalized).

Advertising