Bafo Technologies USB 2.0 - Manual (Page 14)

USB 2.0 Slim DVD & CD-R/RW User’s Manual 13
7 FAQ
7.1 Q: The “Add New Hardware Wizard” or “Found New Hardware Wizard” dialog
box does not show up.
A: Please check following items.
i). Power indicator on?
Make sure power adapter properly plug into power jack.
ii). Un-plug USB cable first and then plug in USB cable again.
iii). Make sure USB plug be inserted into USB2.0 CD-R/RW USB connector
properly
iv). Does computer and USB 2.0 Slim DVD & CD-R/RW has been
connected by USB cable?
7.2 Q: Can’t hear any music.
A: Music output from “Headphone” terminal of Slim DVD & CD-R/RW Drive.
If you want to listening music from speaker then you should connect
Speaker input to headphone output.
Also you have to have the software of media player.
7.3 Q: Why I can’t change “Player Region Code” ?
A: Because you have changed the “Player Region Code” five times.
Please send the unit back to where you buy for initialization.
8 Disclaimer
Information in this document is subject to change without notice. The manufacturer
does not make any representations or warranties (implied or otherwise) regarding
the accuracy and completeness of this document and shall in no event be liable for
any loss of profit or any other commercial damage, including but not limited to
special, incidental, consequential, or other damages.
No part of this document may be reproduced or transmitted in any form by any
means, electronic or mechanical, including photocopying, recording or information
recording and retrieval systems without the express written permission of the
manufacturer.
All brand names and product names used in this document are trademarks, or
registered trademarks of their respective holders.