Trouble-shooting, Declaration of conformity – One for All SV 2010 Internet to TV Link 200Mbps User Manual
Page 5

7
Trouble-shooting
We, Universal Electronics Inc., 6101 Gateway Drive, Cypress, CA 90630, U.S.A., and its subsidiaries
Universal Electronics BV, Institutenweg 21, 7521 PH Enschede, Netherlands, ONE FOR ALL GmbH, Fabrikstraβe 3, 48599 Gronau,
Germany, ONE FOR ALL UK Ltd, Institutenweg 21, 7521 PH Enschede, Netherlands, ONE FOR ALL IBERIA S.L., Gran Via, Carlos III, no 84, 3a
planta, Barcelona, Spain, ONE FOR ALL ARGENTINA S.R.L., AV. Las Heras 2126, 5th Floor (Suite “C”) ZC 1111, Recoleta, Buenos Aires,
Argentina, Universal Electronics Italia S.r.l., Via Cerva, 18, 20122 Milano, Italia
Declare under sole responsibility that the ONE FOR ALL products: Internet to TV Link 200 (SV 2010) & Internet to TV Link 500 (SV 2020)
to which this declaration relates is in conformity with:
EN 55022 : 2006+ A1 : 2007, Class B
CISPR/I /xx /CDV Opt B
EN 61000-3-2 : 2006
EN 61000-3-3 : 2008
EN 50412-2-1 : 2005
IEC 61000-4-2: 2008
IEC 61000-4-3: 2008
IEC 61000-4-4: 2004
IEC 61000-4-5: 2005
IEC 61000-4-6: 2008
IEC 61000-4-8: 2009
IEC 61000-4-11: 2004
In accordance with the Council Directive 2004/108/EC.
EN 60950-1: 2006+A11:2009 / EN 50075
In accordance with the Council Directive 2006/95/EC
Enschede,9th of March 2012
Paul J. Bennett
As Managing Director Europe, Executive Vice President International
CE
DECLARATION OF CONFORMITY
Internet-to-TV adapters are not communicating
New adapters are shipped with the same Powerline Group name and should be mutually communicable at first deployment. If two
adapters are not communicating:
•
Check if the adapters are properly powered;
•
Check if the Ethernet cables are securely plugged in;
•
Perform a reset on both adapters by pressing the RESET button of the adapter for more than 1 second (for safety reasons,
do not use a metal pin). This will reset the adapter to its factory default Powerline Group (“HomePlugAV”).
If the adapters still don’t communicate, the electrical wiring may be causing the issue.
•
Plug two adapters into nearby electric outlets in the same room or into the same power strip. If these two devices can
communicate, gradually increase the distance between the adapters. This method will determine the maximum
distances you can achieve in your house.
•
Pay special attention to the electrical noise generated by the following devices:
- Air conditioning
- Power adapters and chargers
- Florescent lights
- Refrigerators
- Surge protectors and other line filters and conditioning
- Blowers and electrical motors
Please follow the manual instructions carefully. For questions regarding this product please contact:
• www.oneforall.com
IMPORTANT SAFETY INSTRUCTIONS
This product is intended for connection to the AC power line. Make sure to read and understand all safety instructions before using
this product. You can find the safety instructions on www.oneforall.com
708774_SV-2010-2020_RDN-1100512_INT.PAG:SV-2010_SV-2020 10-05-12 11:45 Pagina 7