Opticon CRD 19 E4 User Manual
Opticon Equipment
Overview
CRD-19-E4 Basic Specifications
Parameter
Specifications
Size
(H)95 x (W)350 x (D) 115 mm Max
Weight 650g
Physical
Features
Color Black
Operating Voltage Dedicated AC Adapter: 12V, 5A
Standby: 1.6A max (while not
charging)
Power Supply
Section
Current
Consumption
Max: 3.35A (charging 8 devices)
Battery
Charging
Section
For Charging the
Battery Pack
Output: DC 4.2V, 750mA (per slot)
Operating Temp. 0 deg. C to 40 deg. C
Operating Humidity 25% to 85% (non-condensing)
Storage Temp.
-20 deg. C to 60 deg. C
Durability
Storage Humidity 20% to 90% (non-condensing)
CRD-19-E4 Basic Specifications
Parameter
Specifications
Product No.
Power Voltage: AC 100V to 240V
Input
Current Consumption: 0.8A Max
Power Voltage: 12V
AC Adapter
Output
Peak Current: 5A Max
Detailed View
1
2
4
3
9
8 7 6
5
No
Part
Function
1 Power
LED Indicated the status of the cradle. Blinking
YELLOW means device is ready.
2 Charging
LED
Indicated the charging status of the battery. Solid
GREEN means the battery is fully charged. Solid
RED means the battery is being charged. Blinking
RED means there is an error.
3 Device
Pocket Set the H-19 in this pocket to connect to the
network.
4 Battery
Pocket Set the battery in this pocket to charge it.
5 DC Jack
DC-12V power supply jack.
6 Uplink
Ethernet uplink for CRD-19-E4.
7 Ethernet
Ethernet port for network device.
8 Network
LEDs Indicate the status of the Ethernet port. Blinking
GREEN means there is network traffic.
9 Reset Button Factory Default Reset Button.
Using the Cradle
Network Requirements
À
10/100 BaseT Ethernet.
À
DHCP Network. Please refer to CRD-19-E4 User Manual if the network does not contact a DHCP server.
À
One IP Address.
Network Functions
À
Connect a network cable to a 10/100 BaseT DHCP network. Connect the network cable and power adapter to CRD-19-E4
and wait 25 seconds for the yellow Power LED to blink..
À
Set the H-19 in the device pocket and wait for network connection to be established on the device within 8 seconds. The
network indicator on H-19 will display connection status.
À
The H-19’s battery will be charging at the same time.
Battery Charging Function
À
Set the battery to be charged into one of the Battery Pockets.
À
The Charging LED in front of the Device Pocket will display the charging status of the battery. If the LED blinks with red
Light, please remove the battery and go back to setp 1.
Administration Software (Please refer to CRD-19-E4 User Manual)
À
Web-based AdminTool – allows IT staff to manage the cradle.
À
Device Locator – an application that allows IT staff to locate the cradle on the network.
Please visit
http://www.opticon.com
for more product information
If you try to charge the battery with the ambient temperature outside of the range of 0 to 40 degrees C, the cradle
may stop the charging operation to protect the battery.
Please clean the charging terminals of the H-19 on a regular basis.
Introduction
The CRD-19-E4 is a designated network cradle for the H-19 handheld device and battery charger.
Read this quick start guide carefully before installing and/or using this product.
Keep this quick start guide for future reference and store it in a safe place.
Notice
This quick start guide may be revised or withdrawn at any time without prior notice.
This quick start guide may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any
electronic or machine readable form without prior written consent of Opticon.
Trademarks used are property of their respective owners.
Under no circumstances shall Opticon be held responsible for any special, incidental, consequential or indirect damages,
howsoever caused.
Caution and Warning
Handling Instructions
【
CRD-19-E4】
Do not attempt to disassemble, modify or update this product.
Do not drop this product or put heavy items on this product.
Do not insert foreign substances into this product.
Do not use this product in the following areas:
—
In areas exposed to direct sunlight for long periods of time.
—
In dusty environments.
—
Near water or other liquids, or in extremely high humidity.
—
Near heat sources, such as radiators, heat registers, stoves, or other types of devices that produce heat.
—
Near microwaves, medical devices, or low-power radio stations.
If water or any metallic object gets into this product and if you detect smoke or a strange smell coming from the device,
please stop operating the unit and contact your nearest dealer.
When cleaning this product, rub gently with either a soft dry cloth or a damp cloth with mild detergent.
What’s in the Box
No.
Items
Product No.
Function
1
Cradle with 4 battery walls
CRD-19-E4
Quad network cradle for the H-19 and battery charger.
2
AC Adapter
AC adapter for the CRD-19-E4.
3
Quick Start Guide
Provides product information and instruction guide.
Note: The number of accessories may differ depending on the product specification. Please contact the nearest dealer if
accessories are damaged or missing.
Contact
Please contact OPTICON or your local dealer.
Netherlands
Opticon Sensors Europe B.V.
Tel: +31 (0)23-5692700
email: [email protected]
Sweden
Opticon Sensors Nordic AB
Tel: +46 (0)8-58548560
email: [email protected]
U.S.A
Opticon Inc.
Tel: 800-636-0090
email: [email protected]
United
Kingdom
Opticon Limited
Tel: +44 (0)1582-635100
email:
France
Opticon S.A.S.
Tel: +33 (0)1-41461260
email:
Taiwan
Opticon Far Eastern Ltd.
Tel: +886 2-27597444
email:
Germany
Opticon Sensoren GmbH
Tel: +49 (0)6074-91890-0
email:
China
Opticon Sensors Europe B.V., Shanghai Representative Office
Tel: +86 21-64480881
email:
Italy
Opticon s.r.l.
Tel: +39 (0)051-6321800
email:
Australia
Opticon Sensors Pty. Ltd.
Tel: +61 (0)2-43402666
email:
Spain
Opticon Sensores S.L.
Tel: +34 (0)902-747469
email:
Brazil
Opticon Sensors Europe B.V., Latin American Office
Tel: +55 11-8322 2244
email: [email protected]
More product details, additional support and configuration options (from the Universal Menu Book) are available at www.opticon.com
Copyright © 2008. Opticon. All rights reserved.