BOXLIGHT CP-11t - Manual (Page 16)

ZOOM FOCUS VOLUME
MENU MODE
SELECT
AUTO IMAGE NORMAL
ON–OFF
LAMP
READY
WARNING
TEMP.
LAMP
REPLACE
16
BEFORE OPERATION
TOP CONTROLS AND INDICATORS
Used to select zoom adjust.
(P20)
Used to open or close the
MENU operation.
(P17, 18)
MENU BUTTON
MODE BUTTON
AUTO IMAGE BUTTON
READY INDICATOR
SELECT BUTTON
POWER ON–OFF BUTTON
FOCUS BUTTONS
NORMAL BUTTON
VOLUME BUTTONS
WARNING TEMP. INDICATOR
LAMP INDICATOR
POINT BUTTONS
LAMP REPLACE INDICATOR
Used to select input source
either Computer or Video.
(P22, 29)
Used to operate AUTO
IMAGE function. (P27)
Used to select focus adjust.
(P20)
This indicator is lit in green
when the projector is ready
to be turned on.
This indicator is dim when
the projector is turned on.
And bright when the
projector is in stand-by
mode.
This indicator turns to
yellow when the life of the
projection lamp draws to an
end. (P34)
This indicator flashes red
when internal projector
temperature is too high.
(P33)
Used to adjust volume.
(P21)
Used to reset to normal
picture adjustment preset
by factory. (P26, 30)
Used to select an item or
adjust the value on the MENU.
It is also used to pan the image
in DIGITAL ZOOM mode.
(P28)
Used to execute the item
selected.
It is also used to
expand the image in DIGITAL
ZOOM mode. (P28)
Used to turn the projector
on or off. (P19)
ZOOM BUTTONS