Oxford Garden 18 End Table - Manual (Page 2)

Step 1
On a clean flat surface, lay table top upside down .
Step 3
Step 2
Insert the threaded rods on one corner post into
holes located on one corner of Table Top.
Step 5
Carefully turn the assembled End Table in an upright position.
Step 6
Using a medium grit sandpaper, quickly sand off any marks or
stains. Sand to smooth off areas around the dowel pins.
Assembly Instructions
page 2
18” Square End Table
Step 4
Secure Corner Post to the Table Top using Metal Washer
and Hex Nut .
Repeat steps 2 and 3 for the remaining 3 Corner Posts.
1
1
2
2
A
A
B
B