Pavement Ends 44527 Flip Top - Manual (Page 6)

44527 pg 6 Rev. H 1210
Horizontal Rod
Windshield
Bracket
Slide rod into bracket
until pin pops up
Horizontal Rod
Vertical Rod
Step Six
I NSTALL H ORIZONTAL R OD
Slip the end of the Horizontal Rod into the tube on the Windshield Bracket until the spring button on the rod pops
up through the hole in the Windshield Bracket.
Step Seven
I NSTALL V ERTICAL R OD
Place the bottom of the Vertical
Rod into the hole at the front
of the Side Belt Rail. Bolt the
rod to the Horizontal Rod on
the Bow Assembly with the
Screw and Nut attached to the
Horizontal Rod.
Side Belt Rail
Vertical Rod
Place Vertical Rod
into hole
Front Bow
Rear Bow
Note: The pin must pop up through the hole in the Windshield Bracket for proper fi t.