Pavement Ends 41518 Sun Cap - Manual (Page 4)

41518 pg 4 1206 Rev. 3
Step Six - without Door Surrounds
F ASTEN F LAPS ABOVE D OORS
Locate the hook and loop strips sewn to the front corners
of the Sun Cap. Fasten the strips to each other and tuck
them up above the horizontal sport bar, out of the way.
Locate the fl ap sewn inside the Sun Cap above the door
opening. Wrap the inside and outside fl aps around the
horizontal sport bar and fasten the Hook and Loop Strips
to each other.
Hook and Loop sewn inside fabric. Wrap
Flaps around bar and fasten Hook and
Loop to each other.
Step Six - with Door Surrounds
S ECURE S UN C AP ABOVE D OORS
Locate the hook and loop strips sewn to the front corners
of the Sun Cap. Tuck the hook strip between the horizon-
tal sport bar and the Door Surround.
Locate the plastic strip sewn along the edge of the outer
fl ap, above the door opening. Slip the plastic strip into the
channel on the Door Surround.
Fold the fabric insert from front to back, so that it lays fl at
on top of the horizontal sport bar and wrap the outer loop
strip around the Door Surround and fasten it to the hook
strip tucked inside of the rail to hold the fabric in place.
Tuck the inside fl ap between the Door Surround and the
Sun Cap fabric.
When removing the Sun Cap, it will be easiest
to remove the plastic strips by starting at the
front of the plastic and pulling down and out.
Fold Fabric from front
to back to Lay Flat
Plastic Strips sewn inside
fabric. Roll into channel in
Door Surround
Locate Hook Strip between Sport Bar
and Door Surround and fasten to Loop