Parts kit, Step two, Step one – Pavement Ends 41815 Cargo Cover User Manual
Page 2: Step three
Advertising
41815 pg 2
Rev. A 0203
Parts Kit
Cargo Cover
Qty - 1
Fabric
Plastic Strip
Side Retainer
Web Straps
Plastic Strip
Step Two
Fold down or remove the rear seat. From the back of
the vehicle, hold the cover with the backing side
toward you. Slide the tubing into the channel in the
tailgate retainer.
Step One
Remove your soft top from the hardware. Fold the top and store. Fold the
factory hardware system down onto the vehicle body. Make sure the
hardware system lies as flat as possible, with the bow assembly resting
against the rear sport bar.
Step Three
Drape the fabric forward over the rear of the vehicle.
Use the web straps sewn to the cover, to slide the plastic
strips on the sides into the Side Retainers.
Tailgate Retainer
Channel
Fabric
Tubing
Advertising