Phoenix Audio DRS-8 Mk2 - 8 Channel Class A Microphone Pre-Amplifier - Manual (Page 2)

DRS-8 Specifications
8 Channel 2U - 19” Rack-mount unit: With 240V/110V mains voltage input selector
switch
Inputs Connections: Combo XLR/1/4” jack sockets on Rear Panel
Output connections: XLR's on rear panel
Additional outputs: 25 pin “D” style connector on the rear panel (wired “Tascam”
Standard)
Gain Range (Mic input): -30 to -70 in 5dB steps With 10dB more available on the
fader.
Gain Meter: LED Metering. 5 LED Meter on each channel (with hysteresis)
Phantom Power: Switchable 48V phantom on Push-button switch
High Pass Filter: on Push-button Switch (Roll-off -6dB per octave @ 120Hz)
Phase Reverse: on Push-button Switch
Mute: On Push-button switch.
Mic/Line Push-button switch: Enables Flexibility for input levels.
Phoenix Audio’s unique Class A, transformerless, True balanced Mic input stage.
Transformer-balanced Output on each channel: Driven by the Phoenix Audio Class A
DSOP-2
fully discrete output stage
Class A (DSOP-2) Output specs . Frequency response: 20Hz to 20kHz +- 0.5dB,
Maximum
Output = +26dBu @ 1kHz, Noise = -90dB @ 20Hz to 20kHz.
Frequency Response Mic Input Stage: -0.4dB @ 40Hz, -0.3dB @ 25kHz
Description and Controls
The DRS-8 is an 8-Channel Mic-Pre Housed in a 2 rack-space high, 19” rack
mountable unit. All channels are individually controlled and separated from each
other.
The unit can operate from most AC mains inputs, but the mains selector switch on
the rear panel MUST be switched to the appropriate voltage position for your area,
otherwise significant damage will result. This Unit must be connected to a safety
earth at all times.