Pololu Orangutan SVP - Manual (Page 20)

Hardware included with the Orangutan SVP partial kit.
• Six 3×4 male header blocks
• Six 3×4 female header
blocks
[http://www.pololu.com/catalog/
product/1034]
• One 3×7 male header block
• One 3×7 female header block
• Three 2-pin 3.5mm terminal
blocks
• Five blue shorting blocks
[http://www.pololu.com/catalog/
product/968]
• Two 2×3 female header
blocks
[http://www.pololu.com/catalog/
product/1023]
• One 2×3 shrouded box
header [http://www.pololu.com/catalog/product/854]
• One 2×8 shrouded box header [http://www.pololu.com/catalog/product/898]
• One buzzer
• Five pushbuttons [http://www.pololu.com/catalog/product/1400]
• One 2×20 breakaway male header [http://www.pololu.com/catalog/product/966]
• One 1×20 breakaway male header [http://www.pololu.com/catalog/product/965]
• Five 1×2 female header blocks [http://www.pololu.com/catalog/product/1012]
• Two single-pin female headers
The labeled photo below shows possible locations for installing these parts:
Pololu Orangutan SVP User's Guide © 2001–2012 Pololu Corporation
5. Getting Started Page 20 of 37