Powertrax 9204352725 - Manual (Page 11)

9
18. Push ring gear side wheel in,
making sure c-clip groove on axle
shaft is aligned with the c-clip slot in
the spacer. Insert a c-clip onto the
axle shaft. Pull out on wheel to
seat the c-clip inside the spacer.
19.
Rotate ring gear side wheel 1/4
turn back so that the spacer paddle
and the opening in the synchro ring
are facing out towards you.
Spacer Paddle
20. Insert the non-slotted driver as
shown, making sure the paddle
opening in driver (missing extended
tooth) is facing out towards you.