Precision Turbo and Engine BigStuff3 GEN3 PRO SEFI (LS1) System Hardware & BigComm Software - Manual (Page 108)

BigStuff3 Pro SEFI System (LS1)
Version 1.0 107
The user can also “zoom- in” on a particular area of the logged data in the graph. To “zoom- in”
on a particular area of the graph, depress and hold the left mouse button. Drag the mouse to
cover the desired area. A red box is created around the selected area, as shown in the screen
print below. Release the left mouse button and the selected graph area will fill the screen.
Again, the left and right arrow keys on the keyboard can be used to display the actual engine
operating parameters recorded at each point in the graph.
Once the left mouse button is released the graph area inside the red box above will fill the screen
as shown below.
This window identifies the file
name and location where the
Logged Data was automatically
store to
Red “Zoom In” box
created when left
mouse button is
depressed in the
upper left hand
corner and dragged
down and across to
create a box over the
desired area.
Red (vertical)
cursor line.