Precision Turbo and Engine Precision Turbo & Engine PW66 Wastegate - Manual (Page 5)

Wastegate spring removal and installation
1. Remove the PW66 WASTEGATE from the inlet pipe.
USE CAUTION AS THE WASTEGATE MAY STILL BE VERY HOT!
2. WARNING! THE WASTEGATE CAN TOP IS UNDER HIGH SPRING TENSION. USE
SAFETY GOGGLES AND REMOVE WITH CARE. Using a 4mm hex key, loosen and remove the
wastegate v-band clamp. The use of a press or vise may be used to hold down the wastegate can top
while loosening the clamp. If using a press or vise for disassembly, use a cloth or micro fiber rag to
protect the surface finish from scratches. Remove the clamp and cap slowly, using care to secure the
spring top plate and spring/springs upon removal.
5
PART NUMBER:
PBO085-3000
NAME: PW66
DESCRIPTION: 66MM EXTERNAL WASTEGATE