MacDon 5020 Mower Conditioner - Manual (Page 77)

77
ADJUST LINK TO CENTER OF SLOT
A
UNLOADING & ASSEMBLY
ADJUST HEADER ANGLE AND FLOAT
Mechanical Center Link – Adjust header angle by
adjusting center float link to center of slot (A).
Hydraulic Header Angle – Adjust header angle by
positioning hydraulic cylinder near center of gauge
(B).
Adjust header float. See "Header Angle" and
"Header Flotation" in Operation section for
adjustment details.
ADJUSTMENTS AND CHECKS
Perform the final checks and adjustments as listed on the "Pre-Delivery Checklist" (yellow sheet) to ensure the
machine is field-ready.
IMPORTANT: To avoid machine damage, check that no shipping dunnage has fallen down between auger
and pans.
Place Operator’s Manual and Parts Catalog in storage case (C) provided on primary drive shield.
HYDRAULIC HEADER ANGLE KIT
B
12’ UNITS 14’ & 16’ UNITS
MANUAL STORAGE CASE
C
C