Prescolite AKT6LED3 Track Mount - Manual (Page 2)

3/32" SETSCREW LOCK
FOR HORIZONTAL SWIVEL
PHILLIPS SCREW LOCK
FOR VERTICAL AIM
ADJUSTING THE AKT6LED3
The AKT6LED3 fixture is designed to have a locking vertical and horizontal adjustment. The track
adapter does not swivel (this includes all track adapters for other track brand systems that may
be mounted to the AKT6LED3 as an option). All adjustment should be made at the knuckle and
coupling on the stem.
VERTICAL ANGLE ADJUSTMENT
To adjust the vertical angle, loosen the Phillips screw on the knuckle enough to allow the knuckle
to be adjusted, set the head angle and tighten the screw, making sure the teeth on the knuckle
engage fully.
HORIZONTAL ANGLE ADJUSTMENT
For the horizontal adjustment, loosen the setscrew on the coupling above the knuckle, and swivel
the head to the necessary position and tighten the setscrew. (Note – When the setscrew is
loosened, the head will only rotate about two turns before a stop limits the rotation.)
Instr
u
ction
Sh
eet
Part No...........................................
With representatives offices in principal cities throughout North America.
Copyright , revision, All Rights Reserved - Printed in U.S.A.
701 Millennium Blvd., Greenville, SC 29607
www.pre
s
c
o
lit
e
.c
o
m
y
Prescolit
e
T
o
ll Free
T
e
c
hnic
a
l S
u
pp
ort
1.
88
8.
PR
S.
4TEC
y
Ho
u
rs
: 8a
m
-
5p
m
E
T
y
M-
F
93025144
2009 08/24/09
OTHER TRACK SYSTEM ADAPTERS
When the AKT6LED3 is ordered with other track system adapters as options, please refer to the
other track system’s instructions for details on the use, features, and limitations of their system.
More information can usually be found online at the track manufacturer’s website.
COUPLING
KNUCKLE
KEEP THESE INSTALLATION INSTRUCTIONS