Brother PQ-1500 - Manual (Page 18)

CONTENTS
Accessories
Names of
Parts
Before You
Begin
Changing
Needles and Light Bulb
Threading
Stitch
Samples and Needle Chart
Changing
Presser Feet
Basic
Sewing
Caring for
Your
Machine
Trouble Shooting
14
Basic Sewing (2)
Note Make sure power is off before changing feet.
Rolled Hem Foot
1 Attach rolled hem foot.
✽ Refer to page 12 for instructions
on changing sewing feet.
2 Insert needle approximately 0.5
cm from the edges of the fabric
and sew 2 stitches.
3 Raise needle and foot, pull fabric
towards you.
4 Hold the 4 threads in your left
hand.
0.5 cm
0.5 cm
Rolled Hem
5 With your right hand, put the
edge of the rolled hem under the
presser foot, from the spot where
the threads come out. Insert the
edge so that it lies directly under
the needle.
6 Pull gently on threads in left hand
while sewing the first 3-4 stitches
to hold them in place.
7 Fold hem over about 0.5 cm and
continue feeding folded hem un-
der foot while sewing.