Prescolite PENDANT SERIES FIXTURE - Manual (Page 2)

www
.prescolite.com
•
Prescolite
T
ollFree
T
echnical
Support
1.888.PRS.4TEC
•
Hours:
8am
-
5pm
ET
101 Corporate Drive, Suite L • Spartanburg, SC 29303
With representatives offices in principal cities throughout North America.
Copyright 2004, 08/04 revision, All Rights Reserved - Printed in U.S.A.
Part No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .01858100
Instruction
Sheet
FIG. 1
Cylinder
Knurled
Locknut
Washer
FIG. 3 FIG. 2
3/8"
1/8" Dia.
Hole
Cotter Pin
Washer
Locknut
INSTRUCTIONS FOR SHORTENING STEM LENGTHS ON CATALOG NO. 1122, 1125, 1128, 1136, 1138 & 1140
1. Remove reflector or baffle, if used.
2. Loosen knurled locknut. (Fig. 1)
3. Push cylinder up stem.
4. Remove cotter pin and pull socket assembly
clear of the stem. (Fig. 2)
5. Cut stem to desired length and drill 1/8"
diameter hole through stem 3/8" from end of
stem to center of hole. (Fig. 3)
6. Reassemble fixture.