Purus Minimax Two Part-Tile - Manual (Page 2)

P
u
ru
s -
U
K
-
Installation
instruction Minimax
50
Two
Part
Tile -
0
2
8
3
3
-
2
0
1
2
:1
2
This document must not be copied without our written permission
,
and the contents thereof must not be imported to a third party
nor
be used for any unauthorized purpose. Contravention will be prosecuted. Purus AB
Denna handling får ej utan vårt medgivande kopieras. Den får ej heller delgivas annan eller eljest obehörigen använd
as.
Överträdelse härav beivras med stöd av gällande lag. Purus A
B
Tel 0416 - 257 00 Fax 0416 - 257 20
Purus AB Södergatan 7
52719_Monteringsanvisning Two Part MiniMax 50 (Vinyl)
1(1)
- - -
Assembly
1:20
2011-10-25 SwS
- - -
-
-
-
1
- E
Artikel nr Benämning
Blad
Ersatt av / Utgången datum Denna ersätter
Godkänd sign. datum
Konstruktör Material
Skala
Skapad datum
Generell tolerans. ISO 2768-1
Utgåva
Vikt (gram) Volym (cm3)
Ytbehandling
Kommentar
275 31 SJÖBO
www.purus.se
A3
Installation:
Connect the outlet securely (6) to the waste pipe
system to ensure no leaks.
Test for leaks before proceeding.
Support the outlet section (6) of the floor gully
vertically before laying the floor former tray and floor
boards.
Add a bead of MS polymer to fix the middle section
to the board.
Grab the outlet section (6) with one hand and start
screwing on the middle section (4). Continue using
the installation tool.
Screw down the middle section (4) firmly with the
installation tool so that the middle (4) and the outlet
sections (6) are fully fixed together.
6
7
4
!
1
2
3
This document must not be copied without our written permission
,
and the contents thereof must not be imported to a third party
nor
be used for any unauthorized purpose. Contravention will be prosecuted. Purus AB
Denna handling får ej utan vårt medgivande kopieras. Den får ej heller delgivas annan eller eljest obehörigen använd
as.
Överträdelse härav beivras med stöd av gällande lag. Purus A
B
52718_Monteringsanvisning_limning Two Part MiniMax 50 (Tile)
1(1)
- - -
Assembly
1:3
2011-10-25 SwS
- - -
-
-
-
1
- E
Article no Name
Page
Replaced by Date This drawing replace
Approved by Date
Designer Material
Scale
Created date
General tolerance. ISO 2768-1
Edition
Weight (gram) Volume (cm3)
Surface treatment
Annotation A3
Purus AB Södra Dragongatan 15
SE-271 39 YSTAD, SWEDEN
Ph. +46 104144900 Fax +46 104144996
www.purus.se
!
Remember to remove the installation tool (7)
from the floor gully.