Quadrox QGuard Installation Manual - Manual (Page 22)

GuardNVR Installation Manual 22
Version 4.4 Series
2.4.2 Connecting GuardNVR to the local network
When you start your GuardNVR system, your operating system detects your network adapter
and automatically starts the local area connection. Unlike other types of connections, the local
area connection is created automatically, and you do not have to click the local area connection
in order to start.
A local area connection is the only type of connection that is automatically created
and activated.
To establish connections of another type follow the steps below:
1. Click Start -> Settings -> Control panel -> Network connections
2. In the Network connections window click File-> New connection. You’ll see the
following window:
Network Connection Wizard Screen
Follow the prompts the network connection wizard provides to define your unit in the network.
For obtaining more detailed information about your network settings, please contact
your system administrator or check the OS manual.
2.4.3 Assigning IP address
If you cannot use DHCP or APIPA for IP address and subnet assignment, the IP address for
the Windows OS-based client must be manually configured. The required values include the
following:
An IP address for each network adapter installed on the computer.
The Subnet mask corresponding to each network adapter's local network.