Braun VL955 - Manual (Page 18)

Pre-Lift Operation Notes and Details
Page 16
WARNING
Discontinue lift use
immediately if any lift
component does not
operate properly.
Failure to do so may
result in serious
bodily injury and/or
property damage.
After the platform is fully lowered
(entire platform reaches the
ground), the roll stop must
remain in the fully unfolded
(ramp) position until the entire
wheelchair has crossed the roll
stop when loading or unloading at
ground level. When raising the
platform, the lift operator must
view the platform as it raises to
ensure the roll stop rotates to the
vertical position.
Bridging: The VL955 incorpo-
rates a bridging feature. This
feature stops the down travel of
the platform if the outboard end
of the platform contacts a raised
surface (such as a curb), prevent-
ing the operator from lowering the
inboard end of the platform.
Handrails: Dual handrails are
provided for wheelchair passen-
ger (or standee) use. The
handrails automatically unfold to
the deployed position when the
platform unfolds and fold auto-
matically to the stowed position
when the platform folds. The
passenger may choose to grip
the handrails when on the lift
platform (if applicable).
Note: The right (front) handrail
is equipped with an UP/DOWN
control switch (details in Control
Lift Features (continued)
The lift operator or attendant
must be certain the entire
platform reaches and rests
safely on the ground.