Retsch DM 400 - Manual (Page 24)

Installation
24
4.3 Positioning
DANGER!
Do not walk under the transport pallet during transport.
To position the disc mill you will need a crane or other suitable means
of transport as well as 2 carrying straps (not included with delivery)
with a minimum length of 40cm and loadbearing capacity of 500 kg.
CAUTION!
Weight of the disc mill is approx. 260 kg with grinding
discs (WC) and transport pallet!
NOTICE!
The disc mill must be placed on an even, stable surface.
It can be screwed to this or to a base plate.
1. The disc mill is screwed to the transport pallet from underneath
using 3 screws. Loosen screws using a spanner wrench (17
mm).
2. Open the housing cover (14) by unscrewing the quick acting
screws on either side.
14S