Retsch GM 300 - Manual (Page 28)

Operating the machine
28
P01 Sequences 01 P01
P01+P02 Sequences 02 P02
P01+P02+P03 Sequences 03 P03
P01+P02+P03+P04 Sequences 04 P04
P01+P02+P03+P04+P05 Sequences 05 P05
P01+P02+P03+P04+P05+P06 Sequences 06 P06
P01+P02+P03+P04+P05+P06+P07 Sequences 07 P07
P01+P02+P03+P04+P05+P06+P07+P08 Sequences 08 P08
P01+P02+P03+P04+P05+P06+P07+P08+P09 Sequences 09 P09
P01+P02+P03+P04+P05+P06+P07+P08+P09+P10 Sequences 10 P10
5.13 Setting the grinding time
• Turn the rotary knob until you reach the grinding time menu item.
The selected menu item is marked by the dark selection bar.
• 1. Press the rotary knob to set the minutes.
• Turn the rotary knob until you reach the desired grinding time in minutes.
• 2. Press the rotary knob to set the seconds.
• Turn the rotary knob until you reach the desired grinding time in seconds.
• 3. Press the rotary knob in order to return to the main menu.
5.14 Setting the Speed
• Turn the rotary knob until you reach the speed menu item.
The selected menu item is highlighted by the dark selection bar.
• 1. Press the rotary knob to set the knife speed.
• Turn the rotary knob until the desired speed (revolutions per minute) is
reached.
• 2. Press the rotary knob to return to the main menu.
NOTE
Start runny liquid samples at a low speed. Increase the speed gradually. The
maximum speed for liquid samples is just 2,500 revolutions per minute.
Sequences Program