Retsch PT 100 - Manual (Page 28)

Fault messages
28
NOTICE
4.H0006
Defective components due to liquids
Penetration of liquids into the inside of the device
–
Components are damaged and the function of the device is no longer
ensured.
• Clean the device under running water. Only use a moist cloth
Pos : 8. 4 / 00004 War nhi nweis e/H 0009 H INWEI S Ger ät esc haden durch Lös ung s mit tel @ 0\ mod_1231165437212_9.doc @ 5441 @ @ 1
NOTICE
Damage to the machine through solvents
– Solvents may damage plastic parts and the paint finish.
• It is not allowed to use solvents.
Pos : 8. 5 / 00010 Bedienungsanlei tungen Kapit elsamml ung en/PT 100 ( 2011)/0025 PT 100 Rei nigung und Wart ung /2505 PT 100 M odul R ei nigung und Wart ung @ 3\ mod_1302848234736_9.doc @ 25178 @ @ 1
The PT 100 laboratory sample divider is designed to allow all parts coming into
contact with materials to be removed easily without tools. In detail these are:
• dividing head or
• Wide-mouth and DURAN® laboratory bottles
• Feed hopper and DR 100 push-fit chute
When these parts are removed from the device, they can be cleaned in a water
bath, under running water and in a dishwasher.
Pos : 9. 1 / 00005 Übersc hrift en/1. Übersc hrift en/1 Fehler meldungen @ 2\ mod_1259056589728_9. doc @ 17580 @ @ 1
7 Fault messages
Pos : 9. 2 / 00010 Bedienungsanlei tungen Kapit elsamml ung en/PT 100 ( 2011)/0035 PT 100 Fehler meldung en/3505 PT 100 M odul F ehler meldung @ 3\ mod_1302781252066_9.doc @ 25129 @ @ 1
Error code Error Measure
F1 Motor is not running or
the rotation of the
dividing head has been
stopped manually Press the STOP button; if the error
persists, after-sales service must be
consulted
F3 Speed too high or too
low Press the STOP button; if the error
persists, after-sales service must be
consulted
F5 Keypad defective Service necessary
Pos : 10.1 /00010 Bedi enungsanleit ung en Kapitels ammlungen/------- Seit enumbruc h ----------- @ 0\ mod_1222344373758_0. doc @ 2386 @ @ 1