Retsch UR 2 - Manual (Page 10)

2/8/2012 Retsch GmbH
10
0002
Assembly of the discharge hose
C D E
F G
Fit seal G around thread F on the machine.
Screw on ball valve C.
Fit seal G around connector D.
Screw connector D into ball valve C.
Slide hose E onto connector D.
Check the discharge hose connection for freedom from leakage.
Escaping water can lead to damage of objects in the vicinity.
!
Remove the mains plug from the socket before checking the discharge
hose connection for leakage.
Escaping water can cause electric shocks.