RKI Instruments GX-82A - Manual (Page 37)

Model GX-82A Instruction Manual
34 Hayward, California (510) 441-5656
requirements for portable sample-drawn monitoring.
1. Assemble the probe, hose, bulb, and adapter. Slide the adapter
into place over the sensor cover.
2. Turn on the GX-82A and allow it to complete the start-up proce-
dure.
3. Take the instrument into the area to be monitored.
Caution
Do not place the probe tip in liquid or other materials
which could be drawn into the Aspirator accessory or
the GX-82A.
4. Place the probe tip in the desired location, then squeeze the aspi-
rator bulb several times, at a moderate pace. Watch the GX-82A’s
display for changes.
WARNING
W
ITH THE
S
AMPLE
-D
RAWING
A
SPIRATOR ATTACHED
,
THE GX-82A DOES NOT MONITOR THE AMBIENT AIR . U SE
THE
A
SPIRATOR ONLY WHEN SAMPLE
-
DRAWING MEA-
SUREMENTS ARE NECESSARY
,
AND REMOVE IT BEFORE
RESUMING REGULAR MONITORING
.