Replacing the remote control batteries, Troubleshooting, Reference replacing the remote control batteries – Bose Lifestyle DVD Home Entertainment Systems User Manual

Page 39

Advertising
background image

AM259776_01_V.pdf

October 30, 2001

37

Reference

Replacing the remote control batteries

Slide the battery compartment door off of the back of the remote. Find the polarity markings
(+ and –) inside the compartment and install the batteries accordingly. Slide the cover back on
the remote and snap it closed.

Figure 16

Opening the remote con-
trol battery compartment

Troubleshooting

+

+

+

+

Battery

compartment

door

Battery

compartment

AAA batteries (4)

Problem

What to do

System doesn’t do any-
thing

• Make sure the power connector is inserted securely into the media center, the power

cord is inserted securely into the Acoustimass

®

module, and the power pack and power

cord are plugged fully into operating AC wall outlets.

• Be sure to select a source (CD/DVD, AM/FM, etc.).
• Unplug the media center power supply for 60 seconds, then reconnect it. This allows the

unit to reset itself after a power surge or power interruption.

No sound

• Increase the volume.
• Check to see if MUTE is lit on the display. If it is, press the Mute button on the remote

control to unmute the sound.

• Make sure the audio input cable is firmly seated in the media center SPEAKER ZONE 1

jack and the multi-pin connector on the other end is firmly seated in the Acoustimass
module AUDIO INPUT jack.

• Check speaker connections.
• Turn the media center off for 60 seconds, then on again, to restore communication

between the media center and the speakers.

• Check the connections for any external components. Make sure to select the correct

source for the desired input.

• Be sure the disc is placed correctly, label-side up, in the CD tray.
• Connect the FM and AM antennas.
• Make sure that the power switch on the Acoustimass module is set to ON (I).

Advertising