Operating modes, Timer account, Display messages and symbols – Binatone 3488 User Manual

Page 2: Setting the clock, Menu functions, Key beep, Muted 00-27

Advertising
background image

page 2

BASIC USE

Operating modes

page 3

BASIC USE

Timer Account

1

2

4

Press

until the display shows

Press

to display the total time

Press

and hold it for 3 seconds

<TIMER ACCOUNT >

OR, to re-set the timer to zero:

3

Press

to quit menu mode

This shows you how much time you have spent on calls (incoming and outgoing).

Display messages and symbols

1

2

3

4

5

6

Press

until the display shows

Press

so the display shows

Press

again

Key in the current time, using the dialling keypad

Press

if necessary to change the AM / PM setting

Press

to confirm, then to quit menu mode

<SETTINGS >

CLCK SETTING >

The time is a four-digit number (HHMM) using the 12-hour clock

Setting the clock

Handset mode

Lift the handset to get a line
Replace the handset at the end of your call

Press

to get a line

Press

at the end of your call

Lift the handset to get a line

Press

to listen to the call via the loudspeaker while talking

into the handset

Press

to toggle between group listening and handset modes

To switch from handset to speakerphone mode:

Press

and hold it while you replace the handset

Press

once, release it, then press and hold it

To switch from speakerphone to handset mode:

Lift the handset

To switch from group mode to speakerphone mode:

while you

replace the handset

Speakerphone (hands-free)
mode

Group listening mode

Switching between modes

Menu functions

The

take you through a

range of options on the display —

MENU buttons

Press

Press

Press

or

to bring the menu up on the display, and

to select the option on the display, and go to the next level

to move back one level and to quit ‘menu mode’

to scroll through the

menu options
You can do this with the handset on-hook or off-hook.

For details of each feature, see the relevant page of this guide.

… or you can simply replace the handset to quit.

or if you wait for one minute without pressing a button, the

phone will automatically quit ‘menu mode’ and show the time.

THE DISPLAY MAY BE BLANK FOR A FEW MOMENTS BEFORE SHOWING THE TIME.

Key beep

1

2

4

Press

until the display shows

Press

Press

then

to quit menu mode

<KEYBEEP >

3

Press

or to switch between

and

ON

OFF

Normally, the unit will ‘beep’ whenever you press a button or key. You
can turn this off if you prefer.

02083448870

MUTED 00-27

The appears when you are using the Phone Book.

The appears when the phone is off hook (either on a call
or using the menu or Phone Book).

The (on-hook dialling symbol) appears when you are dialling
back a number from the Caller ID memory or the Phone Book, with
the handset on the base. It disappears when you lift the handset.

When you key in a number using the dialling keypad, it is
shown here. When the phone is ringing, the caller’s ID
may be shown here.

Call timer — when the phone has been connected to the line for
20 seconds (either busy on a call or with no button being
pressed), the duration is shown here. When you hang up, the
timer stops and stays on the display for another 16 seconds.

When you mute the
mouthpiece by pressing
the SECRECY button,

’ is shown here.

MUTED

NEW
CALL

The is shown when Babysitter’s Call is turned on (see page 7).

The appears when the battery needs to be replaced.
Without a battery, the clock and the Caller ID functions
will not work.

This is shown when there has been an incoming call, until
you have checked the caller’s ID.

The is shown if you subscribe to the BT Call Minder service (or
an equivalent service from your service provider) and a caller has
left a new message in your mailbox.

CALLER ID

BABYCALL

SETTINGS

STORE

TIME ACCOUNT

KEYBEEP

05-49 P

CLOCK >AM

KEYBEEP ON >

01-48-09

00-00-00

TOTAL

DELETED

MENU

Advertising