RKI Instruments M2 for AC-DC - Manual (Page 4)

2 • M2 AC-DC Power Supply
Installation
This section describes procedures to mount the AC-DC power supply and wire it to the
M2.
Mounting the AC-DC Power Supply
1. Select an appropriate mounting site where the power supply is not likely to be
bumped or disturbed. Make sure there is sufficient room to wire the power supply
back to the M2.
Figure 3: 49-4000RK Aluminum Junction Box Outline and Mounting Dimensions
Figure 4: 49-4000RK-SS Stainless Steel Junction Box Outline and Mounting Dimensions
2.62 5.22
Ø3.61
3.34
5.05
2X .20 DIA x .45 SLOT
2.40 3.15
1.10
3.66