BT 1020 - Manual (Page 49)

Hub Phone 1020 – Edition 1 – 16.07.07 – 8281
49
Beep tones
Your BT Hub Phone 1020 handset emits beeps to alert you to
certain situations. You can set the handset to beep:
• As confirmation each time a handset button is pressed
(key beeps).
• If the battery is low.
• If you go out of range of the base.
These beeps can be switched ON or OFF. However, beeps
which confirm settings cannot be switched off.
To switch key beeps On/Off
1. Press Menu to access the menu.
2. Press or to scroll and display
HANDSET SETTINGS
and
press OK .
3. Press or until
BEEP TONES
is displayed and
press OK .
4. Press or until
KEY BEEP
is displayed and press OK .
Handset settings
The default setting for all key beeps
is ON.
8423 Hub Phone 1020 Iss.3 [1] 12/10/07 12:26 Page 49