RKI Instruments RM-5000 Series Multi-Unit Case - Manual (Page 7)

2 Important Notices on Safety 2-3. Precautions
- 7 - RM-5000 Multi-unit Case
2-3. Precautions
CAUTION
• Do not use a transceiver or mobile phone, etc. near the multi-unit case.
Radio wave from a transceiver near the multi-unit case or its cables may disturb operations. If a
transceiver or other such device is used, it must be used in a place where it disturbs nothing.
• To restart the multi-unit case, you must wait five seconds or more before doing it.
Restarting the multi-unit case in less than five seconds may cause errors.
• The safety and quality of the product cannot be guaranteed if this operating manual is ignored
when operating or maintaining the multi-unit case or it is altered in any way or repaired using
unspecified parts. We will not be liable for any accidents caused by these conditions.
• Careful consideration should be given to instrumentation to maintain safety even when a trouble
like disconnection of power/signal cable or unexpected malfunction or failure occurs.
• This is an electrical appliance. Be careful that it may be affected, in rare cases, by power supply
noises, static electricity, and electromagnetic noises. Before using this product in an environment
with such noises, provide for protective measures against them.
• Do not disassemble/modify the multi-unit case, or change the settings if not necessary.
Disassembling/Modifying the multi-unit case will invalidate the warranty of the performance.
Changing the settings without understanding the specifications may cause alarm malfunctions.
Please use the multi-unit case properly in accordance with the operating manual.
• Do not forget to perform a regular maintenance.
Since this is a safety unit, a regular maintenance on it and the detector head must be performed
to ensure safety.