Robustel RobustLink - Manual (Page 10)

Robustlink Central Manager User Guide
RT_UG_RobustLink_v.1.0.0 12.12.2013 10 / 43
Confidential
HOME
Item Description
Records Per page
Selected from “10”, “25”, “50”, “all”, user can set how many devices are wanted
to show in one page.
Search
User can enter characters to search specific information. For example, when
enter “R3000”, all information relevant to R3000 will show up.
Index Show the index of devices.
Status
Show the status of devices. If device login to RobustLink, it will show “ ”, or
it will show “ ”.
Device ID Show the ID of device.
Device Type Show the type of device: M1000 XP, M1000 Pro V2 or R3000.
IMEI Show the IMEI number of device’s wireless module.
RSSI Show device’s current signal level.
IP Address Show device’s current IP address.
Version Show device’s firmware version.
Region Show specific region information of device.
Sync
Show whether the device information is synchronous with RobustLink. It shows
blank while synchronous, If not it will show symbol “ ”.
Details
Show note information. User can click “Config” to open another configure web
page.
Note: It’s only available for M1000 XP and M1000 Pro V2.
3.3. CONFIGURATION -> Basic Setting
This section allows user to do basic settings of RobustLink.