Blaupunkt BREMEN RCM 127 User Manual
Page 7
CD - Betrieb (Option)
7
DEUTSCH
ENGLISH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
8
S (select)
Press S briefly:
The current time will appear in the display header.
The menu for the sound settings will appear in the display.
Press
/
to retrieve the function you would like to alter.
Press / or << / >> to select
TREBLE
,
BASS
,
FADER
or
BALANCE
.
If
LOUDNESS
is highlighted in the display, this means that
this function is currently active. Switch it off by pressing the
corresponding softkey again. Refer to the section on “Pro-
gramming with DSC – VARIOUS” to set the intensity.
The settings for
EQ
(equalizer) and
DNC
are described sep-
arately.
DSC main menu:
Press S for approximately 1 second.:
This activates the
DSC MAIN MENU
.
Here you can adjust the programmable basic settings. For
further information, read: “Programming with DSC”.
9
Display/Selection menu
The selected mode of operation and the functions which
can be selected appear in the display.
It is possible to preselect colour, illumination and other set-
tings. Refer to the operating instructions in the section on
“Display settings”.
:
Display header
Indicates the current selections, e.g.
when operating the radio, the station;
when operating the tape player, the track.
;
Cassette eject
Open/close panel.
Eject/insert cassette.
<
/
Softkeys
Use these keys to select the functions appearing in the dis-
play (a new menu will appear).
Other functions can be switched on/off (alternates between
normal and highlighted display).
Press
EXIT
to return to the previous (main) menu.