S&S Cycle Speedometer Calibrator (Part 55-1007) User Manual
Page 4
Fine-tuning
S&S
®
Speedometer Calibrator can be fine-tuned should initial
setting prove inaccurate (error will usually be small). For instance,
odometer indicates 106 miles traveled over actual distance of 100
miles. Initial calibration percentage was +39%.
1.
Use following formula to calculate final correction
percentage:
= Final Correction %
OR:
100 x (100 + 39)-100 = 0.94 x 139 -100 = 130.66-100 = +30.66%
106
2.
Reset calibrator to +31%
Disclaimer:
The motorcycle operator remains responsible for operating the
motorcycle in a safe, prudent, and legal manner at all times.
S&S
®
assumes no responsibility for speeding tickets or any other
liability associated with the use of this product even in the event
said product should malfunction. Use of the calibrator to cause
an odometer to register any mileage other than true mileage
may be a violation of state or federal law. If determined
appropriate by S&S, warranty reimbursement will be limited to
repair or replacement at the sole discretion of S&S Cycle.
4
Actual Mileage
x (100 + initial calibration %) - 100
Indicated Mileage
Because every industry has a leader