Bushnell 78-6000 - Manual (Page 8)

TROUBLESHOOTING GUIDE
If after you have set-up your new telescope you are unable to see any objects, use this Quick
Reference guide to help you to understand the cause of the problem and quickly determine a remedy
1. I’ve completed the set-up yet I cannot see anything
• Check to see if objective lens cover and all
other lens covers have been removed.
• Try to view an object that is 200 or more
yards away.
• If there is more than one eyepiece included
with the telescope, use the lowest power
(highest number) eyepiece to begin viewing.
• Use the
Rack & Pinion Focusing Mechanism to
bring the object you are trying to view into
focus