S&S Cycle G-Extreme Dual Carb Kit - Manual (Page 2)

2
This product should only be installed by a trained professional with proper tools. If you do not feel comfortable performing this installation, please
contact the S&S® Tech Line (608) 627-TECH for the location of the S&S dealer closest to you.
WARNING
Gasoline is flammable. Be sure to work in a well-ventilated area and keep all open flames away from the motorcycle as you work on it.
Before riding the motorcycle you install this product on, be sure to verify the throttle cables are free from restriction and binding. Perform
a full turn of the handlebars and verify the cables move freely and do not bind or pull at full extension.
CAUTION
WARNING
Be sure to disconnect the negative battery cable to prevent accidental starting before performing this installation.
INSTALLATION
1- Start the installation by disconnecting the negative battery terminal and shutting the fuel supply valve off. Position the flanges on the manifold,
followed by the rubber gaskets. Be sure to orient the gasket taper towards the manifold. Install the rubber grommets and standoffs in the
manifold at this time.
Picture 1
G-Extreme® manifold and carb kits shown with optional air cleaner kit. Individual radiused inlets
or air horns also available.