S&S Cycle Stealth Air Cleaner Kit for 1993 and Up Stock CV Carburetor and 2001 and Up Stock Delphi EFI - Manual (Page 5)

5
14- Hold the filter on the backplate and put the filter top plate on top of the filter making sure that the word “Down” is facing down and sitting flat
on the filter and locked into the groove as illustrated in Picture 8.
15- Pass the ¼" X 20 flanged head screws through the plastic top filter plate, thread in and tighten down evenly until snug and then finish torque
to 72 in.-lbs. as illustrated in Picture 9, below left.
16- Remove the 5/16" button head screw from the plastic top filter plate. Picture 10, below right, illustrates the button head screw.
17- Attach an S&S® air cleaner cover or the Harley-Davidson® Twin Cam 88®, 96™, or 103™ stock air cleaner cover to the stealth air cleaner kit by
installing the 5/16" button head screw with 243 blue Loctite® applied to the threads and torque to 10 ft.-lbs.
18- On 2001 and later fuel injected bikes apply the included label containing the EO number to the frame down tube above or below the factory
label. Do not cover up any portion of the factory label.
Picture 9
Torque to 72 In. Lbs.
Picture 10
Picture 11
5⁄16" Button Head Cover Screw
Picture 8
CARB label here