Salsbury Industries 61000 Series Standard Lockers Single Tier - Manual (Page 4)

Standard Lockers – 61000 Series
Single Tier Installation Instructions
Phone: 1-800-562-5377 Int’l Phone: 323-846-6700
Fax: 1-800-562-5399 Int’l Fax: 323-846-6800
www.lockers.com [email protected]
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2014 Salsbury Industries. All rights reserved. Page 4 of 5 3/27/14
SALSBURY INDUSTRIES
1010 East 62 nd Street, Los Angeles, CA 90001-1598
Sloping Hood Installation (Optional)
Step 1: Assemble the top panel to the rear panel with #10 - 24 x 3/8” slot less screws
and #10 nuts (provided). Position the flange of the top panel behind the rear panel.
Step 2: Assemble the side panels to the top panel and rear panel with #10 - 24 x 3/8”
long slot less screws and #10 nuts (provided).
Step 3: Attach the sloping hood to the top of the locker with #10 - 24 x 3/8” slot less
screws and #10 nuts (provided).