Bissell PowerLifter 1694 series - Manual (Page 5)

How To Assemble
Your PowerLifter assembles in two quick steps. The only
tool you will need to assemble your cleaner is a Phillips head
screwdriver.
Your PowerLifter is packaged as two primary components… the
Lower Body and the Handle Assembly. To assemble:
Slide the Handle Assembly (with attached Quick Release
Cord Wrap™) down into the Lower Body until it will go
no further.
Secure the handle by placing one (1) Phillips head screw
(supplied) through the screw opening in the Lower Body and
into the rear of the Handle Assembly. Tighten with screwdriver
until secure.
Assembly is now complete.
The Power Switch controls power to the machine.
The Powered Brush roll at the Floor Nozzle is designed to
enhance cleaning performance. The bristle pattern lifts out the
deep down dirt while gently grooming carpet fibers. The floating
suspension self-adjusts to all carpet heights and protects your
carpet if you leave the Power switch ON. When the machine
handle is in the full upright position, CarpetSaver™
automatically raises the brush off the carpet.
Your PowerLifter is equipped with a Measuring Cup for
adding the proper amount of cleaning formula to the
Tank-in-Tank. Before using the machine, simply fill the
Measuring Cup to the fill line with BISSELL Fiber Cleansing
Formula. Pour the formula into the Tank-in-Tank as shown on
page 6. For convenience, the Measuring Cup stores on the
back of the unit.
5
1.
2.
Power
The Basics: How Your PowerLifter Works
DirtLifter PowerBrush
Measuring Cup
Phillips
Head
Screw
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from outlet
before servicing.
Tip:
Deep cleaning
carpeting
regularly can
reduce dust
and allergens in
your home.
OFF ON
ON
OFF
Power
Switch