Salsbury Industries 3400 Pedestal Mailboxes PARCEL LOCKER DOOR COMMERCIAL LOCK - Manual (Page 2)

SALSBURY INDUSTRIES
1010 East 62 nd Street, Los Angeles, CA 90001-1598
Ph: 1-800-624-5269 Int’l Ph: 323-846-6700
Fx: 1-800-624-5299 Int’l Fx: 323-846-6800
www.mailboxes.com [email protected]
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2011 Salsbury Industries. All rights reserved. 6/21/11 Page 2 of 2
Step 4
Install the Commercial lock cover provided by sliding the tab located
on the Commercial lock cover over the mounting box slot. Secure it
with the two (2) #10-32 x 1/4” long pan head screws. Installation is
complete.
To Check Locking Mechanism
Lock the tenant lock and remove the key. Lock the Commercial lock
and remove the key. Insert the tenant lock key into the tenant lock.
Unlock the tenant lock. The tenant lock key should now be trapped
in the tenant lock. The tenant lock key cannot be removed until the
Commercial lock is unlocked.