Blaupunkt RDM 169 US - Manual (Page 17)

17
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
• Press NEXT briefly and repeatedly un-
til the desired memory level appears
on the display.
Storing stations
You can store six stations on the FM band
on each memory level (I, II, T) using the sta-
tion keys ST1 - ST6.
You can also store six stations each on the
AM/AMT bands. Proceed as follows:
•
Press TU: menu level 2 is displayed.
• Select the frequency band using BND.
• Select a station using the rocker (auto-
matically / or manually << >>).
• Hold the desired station key down until
the program can be heard again after it
has been muted and the beep sounds
(approx. 2 seconds).
The station is now stored.
If necessary, these functions can be deacti-
vated on menu level 2.
Manual tuning:
• Press << >>: the frequency is in-
creased/reduced in steps.
Hold the << >> rocker down to the right or
left to change the frequency quickly.
Paging through the transmis-
sion chains (FM only)
You can use << >> to call up stations from
the region in which they can be received.
If a number of programs in the station chain
can be received, you can page through them
with >> (forwards) or << (backwards), e.g.
NDR 1, 2, 3, 4... .
You can also start Travelstore, for exam-
ple:
•
Press TU: menu level 2 is displayed.
If “AF” fails to come on:
•
Hold down AF on menu level 2.
Changing the memory level (FM)
You can change between memory levels I,
II and T to store stations and retrieve them
again. The selected memory level appears
on the display.
Station tuning
Station seek /
• Press / : the radio automatically
looks for the next station.
If / is held down at the top or bottom, the
seek run continues forwards or backwards
at higher speed.
Station seek
Up
Down
<< / >> Up/down in steps
(on FM, only when AF is deactivated)
Manual tuning with << >>
You can tune manually.
Condition:
AF and PTY are deactivated (the corre-
sponding symbols are not lit in the display).
Radio operation with RDS (Radio Data System)