B&B Electronics 232XS5 User Manual
Page 11
232XS5-1005 Manual
17
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
The Baud Rate is the speed at which communication takes place
between the PC and the Smart Switch. It must be specified so that it is
equal to SW1 – positions 1 – 3 on the Smart Switch.
The Number of Data Bits is the length of each character that gets sent
from the PC to the Smart Switch. This value must be specified so that it is
equal to SW1 – position 4 on the Smart Switch.
The
Module must be set so that it is equal to the Smart Switch Module
which you are using (i.e. PortMUX if you are using a PortMUX).
The User Defined Character must be set so that it is equal to SW2 on
the Smart Switch.
Port Address
COM 1
03F8h
COM 2
02F8h
COM 3
03E8h
COM 4
02E8h
232XS5-1005
Manual
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
18