SATEC RGM180 - Manual (Page 10)

BG0509 REV. A2 10
Operation
1. Connection
Connecting to a Meter
The RGM runs a self-test prior to connection.
The screen will display “Connecting….;”
when connected, Voltage
measurement data will be displayed.
The screen is touch activated.
To display the Main Menu, press MENU
3 times.
The Main Menu allows you to:
-
Select the data group you wish to
be displayed (see Section 6);
-
Conduct display and instrument
setups (see Sections 2 and 3).
Connecting to the RGM
The device allows configuration through the USB or Ethernet at Modbus
address 99.
2. Display Setup
Press on Display Setup from the Main
Menu. The Display Setup menu will
appear.