Blaupunkt Sacramento CD33 - Manual (Page 5)

ENGLISH
E-4
Setting the equalizer
You can select an equalizer curve for 4 music types (Rock,
Pop, Classic, Jazz).
Selecting the equalizer curve
1. Press the AUDIO to select the BAS/TRE adjustment mode.
2. Press the preset button 1 ~ 6/ to select the desired
equalizer curve. “ ” will light on the display window.
• 1 ROCK
• 2 POP
• 3 CLASSIC
• 4/MIX JAZZ
• 5/RPT USER 1
• 6/ USER 2
Adjusting the equalizer curve
You can store and adjust the equalizer settings for frequency
and level.
1. Press the AUDIO to select the BAS/TRE adjustment mode.
2. Adjust the desired sound characteristics with BAS/TRE/
LOUD/X-BASS.
3. Press the 5/RPT or 6/ for more than 2 seconds to store
the equalizer curve.
• 5/RPT USER 1
• 6/ USER 2
Cancelling the equalizer curve
1. Press the AUDIO to display the current equalizer curve.
2. Press the MUTE / SENS while the name of equalizer curve
blinking to cancel the equalizer curve.
The “EQ OFF” will blinking for few seconds.
Tips
• EQ disp *
Displays the current setting of equalizer curve, if the equal-
izer has been set.
(See “
Setting the equalizer”)
• bAS X-BASS
For enhanced bass centered @ 72 Hz, Blaupunkt’s X-BASS
function can be set for either each band and CD/CD changer/
AUX mode. Reduce X-BASS level if your combination of
speakers and add on amplifires sound distorted at the pre-
ferred sound level.
• AU GAIN (AUX gain)
Adjust the input volume of the external equipment.
It is displayed only AUX mode.
• LMt LEVEL (Limit volume)
Adjust the volume at the time of power on. You can adjust
with the actual sound.
• MUt LEVEL (Mute level)
You can adjust the mute level with the actual sound.
• Settings for BASS, TREBLE, LOUDNESS and X-BASS can be
made to each of the following modes independently:
FM/AM/CD/CD changer/AUX
Setting the sound stage
You can select/adjust the position of sound stage to best serve
a particular seat.
Selecting the sound stage
1. Press the AUDIO to select the BAL/FAD adjustment mode.
2. Press the preset button 1 ~ 6/ to select the desired
sound stage as follows.
• 1 POS 1 (For the left seat) B R2 F R4
• 2 POS 2 (For the front seat) B 0 F R4
• 3 POS 3 (For the right seat) B L2 F R4
• 4/MIX POS 4 (For the rear seat) B 0 F F4
• 5/RPT POS 5 (For all the seat) B 0 F 0
• 6/ POS 6 (For all the seat) B 0 F 0
Adjusting the sound stage
1. Press the AUDIO to select the BAL/FAD adjustment mode.
2. Adjust the desired sound stage.
3. Press the desired preset button 1 ~ 6/ for more than
2 seconds to store the desired sound stage.
SacramentoCD33_Eng 2/5/03, 4:27 PM 4