Skyjacker CBL3401 - Manual

Installation:
1. Park the vehicle on level ground, set the emergency brake, & block the rear tires / wheels.
2. Remove the OEM hardware from the carrier bearing while supporting the driveshaft.
3. Install the new Skyjacker carrier bearing lowering spacer using the supplied hardware & torque
the bolts to 47 ft. lbs. (See Photo Below)
Seat Belts Save Lives, Please Wear Your Seat Belt.
I-CBL REV1 3-11
Carrier Bearing Lowering
Installation Instructions
Part # CBL214 / CBL3401
Pg 1
www.skyjacker.com