Soyntec JOINSEE 35x series - Manual (Page 4)

Specifications are subject to change without notice.
© 2008/09 by Soyntec. All rights reserved.
Page 4 / 8
Webcam installation
Please note that in order to install the webcam you need a free USB
connector in your computer.
Follow these steps to install the webcam:
1. Insert the provided drivers CD and select “Install Joinsee Driver”.
2. Click the “Next” button.
3. Click “Finish” to close the installation wizard.
4. Connect the webcam to a free USB connector. The operating system
will detect the webcam and it will be ready to use.
5. Press the snapshot button on top of the webcam to launch the
monitoring software and check that the webcam has been properly
installed.