Warning, Caution, Peration 7 – Bissell GARAGE PRO 18P0 User Manual

Page 7

Advertising
background image

Wet or dry vacuuming mode

1. Attach hose to the wet/dry hose inlet

opening (located on the front left side of the

unit) by pushing fitted end of hose and

turning clockwise until you feel it is secure.

2. Attach extension wand, if desired, to end of

hose by pushing it firmly into the hose.

3. Attach additional wand or tool, if desired, by

firmly inserting onto the wand.

4. Plug in the unit and push the power switch

up to begin vacuuming.

Blower mode

1. Attach hose to the blower hose outlet

opening (located on the right side of the unit

on top of muffler) by inserting fitted end of

hose and turning clockwise until it is locked

in and secure.

2. Attach extension wand, if desired, to end of

hose by pushing it firmly into the hose.

3. Attach additional wand or tool, if desired, by

firmly inserting onto the wand.

4. Plug in the unit and push the power switch

up to begin blowing.

Safety device

1.

The vacuum has a protection device to

automatically power off when the tank reaches

its water capacity (this prevents water from

reaching the motor). If this happens, the red

light will turn on indicating the tank needs

immediate emptying.

2.

If the temperature exceeds the unit’s limit,

the thermal protection device will turn on and

automatically power off the unit. If this

happens, wait 30 minutes prior to restarting

the vacuum.

3.

In the event of a clogged or full dirt tank, the

yellow light will turn on indicating the dirt tank

and filter need cleaning. To ensure best

performance, clean the tank and filter every

15-30 days.

O

peration

7

w w w . b i s s e l l . c o m

8 0 0 . 2 3 7 . 7 6 9 1

WaRnInG:

Do not tamper with

float/water sensor.

always make sure the

float/water sensor is

in the dirt tank and not

outside of the tank.

WaRnInG:

Do not suck up volatile

or flammable liquids

such as gasoline,

kerosene or oil.

caUtIon:

Do not run any objects

including cars over hose.

Float/

Water

Sensor

ug110-4053_18P0_608.indd 7

6/13/08 12:35:30 PM

Advertising
This manual is related to the following products: