Blaupunkt MONTE CARLO TCM 169 - Manual (Page 60)

124
Call meters
The telephone is equipped with an internal
meter which allows you to display the charg-
es or call time for individual calls and the
number of total calls.
The default setting displays the call time.
•
Press / to select “Call meters” and
press OK.
• Press / to make your selection and
press OK:
“Show meter - last call”
–
Time or charge for the last call
“Show meter - all calls”
–
Total call time or charges
“Show meter - roam calls”
–
Time or charges for all calls made in a
roaming network
“Show meter - home calls”
–
Time or charges for all calls made in
the home network
“Reset call meters”
–
Sets time or charges to zero
“Show meter during call”
–
Switch display of call meter during
calls on/off
Note
If the SIM card supports AOC, the menu
items for “Show meter - roam calls” and
“Show meter - home calls” will not appear.
Call forwarding
You can forward incoming calls to another
number. For this to operate the call forward-
ing function must be activated.
If necessary,
•
press / to select “Call forwarding”
and press OK.
• Press / to make your selection and
press OK:
“Forward all calls”
–
Every call will be forwarded immediate-
ly.
“Forward, if busy”
–
The call will not be forwarded unless
the line is busy.
“Forward, if no answer”
–
The call will be forwarded if you do not
answer it.
“Forward, if unreachable”
–
The call will be forwarded if the Radio-
phone is switched off or you are not lo-
cated in an area serviced by GSM.
“Clear all”
–
All call forwarding functions will be de-
activated.
Call barring
You can block incoming/outgoing calls or
forward them to another number. Select the
type of call forwarding you wish to use in
the menu.
•
Press / to select “Call barring” and
press OK.
• Press / to make your selection
from “Bar outgoing calls”, “Bar incom-
ing calls” and “Change password” and
press OK.
Programming with DSC Telephone – Call menu