SPYPOINT I-6 User Manual
Page 6
10
11
English
English
View Date/Time:
To increase the view of the date and
time imprinted on the picture.
Erase one:
To erase the photo or the video on the
screen.
Erase All:
To erase all stored photos and videos,
with the exception of protected photos
and videos.
Format:
To format memory card and to erase all
protected photos and videos.
Protect:
To protect the photo or video on the
screen.
Language:
To select language.
Exit:
To return to viewing screen.
New moon:
Waxing Crescent:
First Quarter:
Waxing Gibbous:
Full moon:
Waning Gibbous:
Last Quarter:
Waning crescent:
DELAY
Allows to choose the time interval to wait between each
detection before the camera records the next photo or video.
Additional setting: It is possible to decrease the delay between
detections to 10 seconds (instead of 1 minute) by using the
following procedure. Note that the battery life will be affected.
Turn OFF the camera. Press and hold the "UP" button, turn
the camera on. "10_S" appears on the screen meaning the 1
minute delay has been replaced by a 10 second delay. To reset
the camera to 1 minute delay, follow the same procedure.
"1_M" appears on the screen (see figure below).
MULTI-SHOT
To take up to 4 consecutive shots at each detection, with a 10
second delay between each photo. This option is available in
"PHOTO" mode.
VIDEO LENGTH
Allows you to select the recording duration when the camera is
set in "VIDEO" mode.
DISTANCE
Turn the dial to the right to increase distance.
10_5
10 sec. delay
1 min. delay